Thermal Discharge Temperature Retrieval and Monitoring of NPPs Based on SDGSAT-1 Images.

High-accuracy sea surface temperature (SST) retrieval near nuclear power plants (NPPs) is one of the most significant indicators for evaluating marine ecological environment quality, monitoring the real-time situation of thermal discharge, and supporting planning decisions. However, complex computations, the inaccessible real-time vertical profile of the atmosphere, and the uncertainty of atmospheric profile data increase the error of SST retrieval. Additionally, influenced by their low spatial resolution, the widely used AVHRR/MODIS remote sensing images (RSIs) are unable to retrieve the detailed distribution of SST in small scale regions such as coastal NPPs. In this paper, we propose a simplified split-window-based temperature retrieval method (the SW method) suitable for SDGSAT-1 30 m thermal infrared spectrometer (TIS) RSIs. Specially, this method only needs atmospheric transmittance and surface emissivity by counteracting the average atmospheric temperature to monitor the thermal discharge of offshore NPPs. First, the geometric and radiometric calibrated thermal infrared and multi-spectral cloudless data of the target regions are selected to obtain the corresponding apparent radiance of the RSIs. Second, in accordance with the red and near-infrared (NIR) bands of multi-spectral RSIs, the surface emissivity is calculated to distinguish water from land. Next, we determine the atmospheric profile parameters from the weather conditions of the target region at the imaging time. Finally, according to the theory of surface-atmosphere radiative transfer, the SST of target regions is retrieved with the proposed SW method, and the results are compared with those of the conventional radiative transfer equation (RTE), mono-window (MW), and the nonlinear sea surface temperature (NLSST) algorithms. The experimental results indicate that the SST retrieved from the split-window algorithms (i.e., SW and NLSST) are generally higher than those of the single-channel algorithms (i.e., RTE and MW). The SST difference between the SW algorithm and the NLSST algorithm is within 0.5 degrees C. In addition, SDGSAT-1 can monitor the seasonal detailed variation of the thermal discharge near coastal NPPs. This article is the first to attempt to quantitative small-scale SST retrieval based on thermal infrared and multi-spectral images obtained from the SDGSAT-1 TIS and a multispectral imager (MII), and therefore, provide an effective reference for marine environment monitoring.