Bending damage of 3D printing T-beam

Siyuan Wu,Zhongde Shan, Ken Chen, Dongming Zhou, Wei Liang,Xiaochuan Wu

Journal of physics(2023)

引用 0|浏览0
暂无评分
摘要
Abstract 3D printing of continuous fiber reinforced resins offers a new approach of designing and manufacturing composite materials. The study applied 3D printing method to fabricate T-beam structures, and investigated the damage process and damage morphology of T-beams under three-point bending loads. Meanwhile acoustic emission was taken advantage of to study the damage process, and principal component analysis and k-means clustering algorithm was used to analyze the signals and classify the damage. The results indicate that the fabrication of continuous fiber-reinforced T-beams can be achieved by 3D printing, and the presence of rib height can significantly improve the bending load capacity by approximately 400% and reduce the maximum deflection by 51%. The analysis of the acoustic emission data indicates that the T-beam bending damage modes includes matrix cracking, interlayer delamination, fiber and resin debonding, fiber cracking and fiber fracture, and the classification results can well explain the bending damage process of the T-beam.
更多
查看译文
关键词
3d printing,damage,t-beam
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要