UAS IR-Thermograms Processing and Photogrammetry of Thermal Images for the Inspection of Building Envelopes

Infrared thermography techniques (IRT) are increasingly being applied in non-invasive structural defect detection and building inspection, as they provide accurate surface temperature (ST) and ST contrast (Delta-T) information. The common optional or off-the-shelf installation, of both low- and high-resolution thermal cameras, on commercial UAS further facilitates the application of IRT by enabling aerial imaging for building envelope surveys. The software used in photogrammetry is currently accurate and easy to use. The increasing computational capacity of the hardware allows three-dimensional models to be obtained from conventional photography, thermal, or even multispectral imagery with very short processing times, further improving the possibilities of analysing buildings and structures. Therefore, in this study, which is an extension of a previous work, the analysis of the envelope of a wine cellar, using manual thermal cameras, as well as cameras installed on board an Unmanned Aerial System (UAS), will be presented. Since the resolution of thermal images is much lower than that of conventional photography, and their nature does not allow for accurate representation of three-dimensional objects, a new, but simple, digital image pre-processing method will be presented to provide a more detailed 3D model. Then, the three-dimensional reconstruction, based on thermal imagery, of the building envelope will be performed and analysed. The limitations of each technique will be also detailed, together with the anomalies found and the proposed improvements.