Rapid Mapping of Slow-Moving Landslides Using an Automated SAR Processing Platform (HyP3) and Stacking-InSAR Method.

The increasing number of landslide hazards worldwide has placed greater demands on the production and updating of landslide inventory maps. As an important data source for landslide detection, interferometric synthetic aperture radar (InSAR) data processing is time-consuming and also requires specialized knowledge, which severely hinders its widespread application. At present, a new cloud-based online platform, i.e., Alaska Satellite Facility's Hybrid Pluggable Processing Pipeline (ASF HyP3) was developed for massive SAR data processing. In this study, combining the HyP3 online platform and Stacking-InSAR method, we constructed a new easy-to-use processing chain for rapidly identifying slow-moving landslides over large areas. With this processing chain, a total of 923 interferometric pairs covering an area of over 1800 km(2) were processed within a few hours (about 4 to 5 h). A total of 81 slow-moving landslides were immediately detected and mapped using Stacking-InSAR method, of which 65 landslides were confirmed by previous studies and 16 landslides were newly detected. Results show that the new processing chain can greatly improve the efficiency of wide-area landslide mapping and is expected to serve as an effective tool for rapid updating the existing landslide inventories and contribute to the prevention and management of geological hazards.