Emissions of Formamide and Ammonia from Foam Mats: Online Measurement Based on Dopant-Assisted Photoionization TOFMS and Assessment of Their Exposure for Children.

Formamide has been classified as a Class 1B reproductive toxicant to children by the European Union (EU) Chemicals Agency. Foam mats are a potential source of formamide and ammonia. Online dopant-assisted atmospheric pressure photoionization time-of-flight mass spectrometry (DA-APPI-TOFMS) coupled with a Teflon environmental chamber was developed to assess the exposure risk of formamide and ammonia from foam mats to children. High levels of formamide (average 3363.72 mg/m) and ammonia (average 1586.78 mg/m) emissions were measured from 21 foam mats with three different raw material types: ethylene-vinyl acetate (EVA: = 7), polyethylene (PE: = 7), and cross-linked polyethylene (XPE: = 7). The 28 day emission testing for the selected PE mat showed that the emissions of formamide were 2 orders of magnitude higher than the EU emission limit of 20 μg/m, and formamide may be a permanent indoor contaminant for foam mat products during their life cycle. The exposure assessment of children aged 0.5-6 years showed that the exposure dose was approximately hundreds of mg/kg-day, and the age group of 0.5-2 years was subject to much higher dermal exposures than others. Thus, this study provided key relevant information for further studies on assessing children's exposure to indoor air pollution from foam mats.