Analysis of fragments larger than 2 mm generated by a picosatellite fragmentation experiment

Satellite breakup models rely on laboratory tests and in-space collision observations; current models can match fragments distributions generated by traditional satellites but may need to be improved for small spacecraft and modern satellites employing new configurations and materials. In the last years, ground tests have been employed to assess the influence of dimensions, materials and internal configurations on fragments distributions and to define the limits of the current models. In this context, an impact test was performed at the impact facility of the University of Padova to characterize the fragmentation of a picosatellite mock-up; more than 7000 fragments were collected, classified and analysed with automatic image recognition algorithms. It was observed that the experimental characteristic length distribution is line with the prediction of the NASA SBM even for the smallest size classes, while the fragments shape distribution is strongly affected by the materials employed in the picosatellite manufacturing.The subset of the collected fragments larger than 2 mm was recently subjected to a more detailed analysis: each fragment was individually weighed, and its three main dimensions were measured. In this paper, resulting fragments distributions are compared with literature data and the NASA Standard Breakup Model; in particular, an analytic relation between fragments characteristic length and size is found. In addition, results show that characteristic length and area-to-mass distributions are affected by the target materials and are clearly influenced by the size resolution of the analysed fragments.