Ray-tracing simulations of a UV/ VUV beamline for the PolFEL free electron laser

The PolFEL free electron laser, currently under construction at the National Centre for Nuclear Research in Poland, will generate a beam of coherent electromagnetic radiation in the ultraviolet (UV) spectral range with a wavelength of about 150 nm to 300 nm, in the form of several hundred fs pulses, energy up to 50 mu J, and repetition rate of 50 kHz. Vacuum ultraviolet (VUV) radiation beam in the wavelength range from 50 nm to 100 nm will be obtained by selecting the third harmonic using an absorption filter. The optical system of the UV/VUV beamline consists of two plane M1 and M2 mirrors and one focusing ellipsoidal M3 mirror. The radiation produced in the laser hits on the M1 mirror at a grazing incidence angle of 5 degrees. After reflection from the M1 mirror, the beam falls on the M2 mirror at an angle of 17 degrees, which directs the beam to the ellipsoidal M3 mirror, focusing the beam at the image plane at the second focal point of the ellipsoid. The M1 mirror is placed behind the 3 m-thick concrete wall in a hutch separated from the experimental hall by a 1.6 m-thick concrete wall. The optical properties of the beamline were tested by ray-tracing simulations using the RAY-UI software, the results of which are presented in the paper.