Multistage strain-hardening behavior of ultrastrong and ductile lightweight refractory complex-concentrated alloys

Lightweight high-entropy alloys or complex-concentrated alloys have demonstrated great potential for engineering applications due to their high strength and lightweight. However, a weak strain-hardening ability and a limited tensile ductility remain their major hindrance. Here, a multistage strain-hardening effect is developed to ensure a high strength and still a sufficient ductility in a rolled and annealed (Ti44V28Zr14Nb14 )(98.5)Mo-1.5 (at.%) lightweight refractory complex-concentrated alloy (M1.5A-LRCCA). This multistage strain-hardening behavior is related to the microstructure and the corresponding initial aver-age dislocation density and distribution by comparison with rolled and annealed Ti44V28Zr14Nb14 (M0-LRCCA) and as-cast (Ti44V28Zr14Nb14)(98.5)Mo-1.5 (M1.5C-LRCCA). The microstructure, with homogeneously distributed submicron precipitations, a moderate initial average dislocation density, and uniform dislocation distribution (e.g., M1.5A-LRCCA), is susceptible to producing various deformation substructures, such as dislocation substructures (slip bands, Taylor lattices, microbands, DDWs), shear bands, and deformation twins, which results in the multistage strain-hardening behavior. This method of achieving multistage strain hardening behavior through a microstructure modulation is significant for engineering applications of lightweight high-entropy alloys or complex-concentrated alloys, and it might be extended to other lightweight and high-strength alloys.(c) 2023 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.