Polarization Transmission of Visible Light in Inhomogeneous Sea Fog Particle Environment

Sea fog is a weather phenomenon suspended in the ocean-atmosphere boundary layer. This phenomenon makes the horizontal visibility of the sea atmosphere less than 1 km. Sea fog reduces sea surface visibility. Moreover, the inhomogeneous sea fog particles in the transmission channel result in the absorption and scattering of photons, which seriously affect the performance of optical detection instruments. Polarization imaging detection can solve this problem. However, the evolution law of transmission characteristics between polarized light and inhomogeneous sea fog particles remains unclear. Therefore, we use the equivalent analysis method to improve Monte Carlo, and finally construct the inhomogeneous particle scattering model. The influence of wavelength and relative humidity on DOP (Degree of Polarization) was calculated by the model. The simulated sea fog was created using brine with a preset concentration, and then established an experimental system close to the actual sea fog environment. Indoor polarized light transmission experiments verified the inhomogeneous particle scattering model. Results showed that the accuracy of the inhomogeneous particle scattering model can reach more than 75%. In the visible band, the DOP decreases with the wavelength increase. DOP450 (Degree of Polarization at 450nm wavelength) is approximately 3-10% higher than DOP532, and DOP532 is approximately 5% higher than DOP671. The relative humidity increases from 45% to 85%, and DOP increases by 10-15%. Therefore, in the visible band, the wavelength and relative humidity are inversely proportional to DOP.