Fabrication of an erbium–ytterbium-doped waveguide amplifier at communication wavelengths for integrated optics applications

Erbium–ytterbium-doped waveguide amplifiers provide a considerable gain at telecom wavelengths, low noise, nonlinearity, and compatibility with optical networks, making it an outstanding amplification module for telecommunication systems. This study reports on the fabrication of an optical waveguide amplifier for integrated optics. The signal can be amplified by using rare-earth dopings such as erbium (Er), which works at telecommunication wavelengths, i.e., 1.55 μm. Er-doped phosphate glass waveguides can be deposited using the sol–gel method, which is convenient for preparing active films on several substrates. The Er concentration was 1–2 × 10 20 /cm 3 . The confinement and the gain of the waveguide can be increased by reducing the width of the waveguide to 0.5 μm. In such a case, more than 1dB net gain can be achieved without additional pump power. The other material used as a dopant in optical amplifiers is ytterbium (Yb). For Er energy levels, a more significant pump intensity is necessary for inversion due to the limited absorption cross-section. This issue is solved by including a substance with a large absorption cross-section that transfers energy to Er. The Ag–Na ion exchange process is then used to fabricate the buried waveguide. In such a process, ions trade between the core material and the molten salt. Then, the waveguide is immersed in the molten salt. The fabricated waveguide has low loss, and a net gain of around 2 dB at a wavelength of approximately 1.55 μm in Er:Yb:Al: phospho silicate glass is achieved. The focus of the research is on the fabrication procedure (materials and methods) of the waveguide.