Digital Rock Mechanical Properties by Simulation of True Triaxial Test: Impact of Microscale Factors

Geotechnics(2023)

引用 1|浏览0
暂无评分
摘要
Complex fractures and pore structures in the rock strongly influence the mechanical properties, and the process from compression to failure is complicated. Under the action of rock stress, pore structure deformation and fractures close or propagate, easily leading to deterioration in the rock mechanical properties until rock failure. Thus, the effects of microscale factors are critical in mechanical properties such as rock strength, elastic modulus, and stress–strain state under the triaxial stress state. It is difficult for physical and mechanical experiments to obtain the qualitative rules of regular structures, but numerical simulation can make up for this defect. In this work, the accuracy of the model was proven through a comparison with previous experimental results. The true triaxial numerical simulation experiments were conducted on representative rocks and natural pore structures. These simulated results revealed that the pore and throat parameters will change abruptly when the particle model volumetric strain is between 0.0108 and 0.0157. When the fracture angle is between 45° and 75°, the fracture has a great influence on the peak stress. The angle between the natural fracture and the fracturing direction should be less than 45° as much as possible. Clay affects the rock strength by influencing the force chains formed by the rock skeleton. Fracturing is easier when the structural clay content is higher than 25%. It is easier to fracture in a direction parallel to the laminated clay when the clay content is below 27%. This work indicates the effects of rock particles, fractures, and clay on the mechanical parameters, providing key fundamental data for further quantifying the fracturing patterns.
更多
查看译文
关键词
true triaxial test,mechanical properties,rock,simulation
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要