Determination of degradation parameters and feeding level of pineapple ( L.) cannery by-product to Hanwoo steers

Objective The objectives of this study were to determine the in situ degradation parameters and appropriate feeding level of pineapple cannery by-products (PCB) based on the growth performance and blood parameters of growing Hanwoo (Bos taurus coreanae) steers fed various levels of PCB. Methods Two ruminally cannulated Holstein cows were used for in situ disappearance rate measurements. Nylon bags (5×10 cm, 45 μm pore size) filled with 5 g of PCB in triplicate were inserted into the ventral sac of the two cannulated Holsteins cows and incubated for 0, 2, 4, 8, 16, 24, and 48 h. A total of 16 castrated growing Hanwoo steers (12.5±0.5 months old, 302.9±25.7 kg of initial body weight [BW]) were used for the experiment. Animals were stratified by initial BW and then randomly assigned to one of four experimental diets (0%, 1.5%, 3.0%, or 6.0% of PCB, on the dry matter [DM] basis) fed for 91-d, including 30-d of adaptation. Results Soluble fraction a of DM and crude protein (CP) was 61.9% and 86.0%, fraction b of DM and CP was 32.7% and 11.2%, and indigestible fraction c of DM and CP was 5.4% and 2.8%. The 6.0% PCB feeding group showed lower productivity compared to animals in the other treatments. Increasing the dietary level of PCB did not alter DM intake, but it was numerically lowest in the 6.0% feeding group. The gain to feed ratio was linearly decreased by increasing of PCB. The quadratic broken-line test estimated that 2.5% (DM basis) was the maximum feeding level of PCB in growing Hanwoo steers (y = 0.103 − 0.001×[1.245−x]2, R2 = 0.18). Conclusion Diets containing up to 2.5% PCB can be fed to growing Hanwoo steers without adverse effects on growth performance.