Nozzle tip damage in three generations of intraocular lens injector models: an experimental laboratory study

Purpose To assess the nozzle tip damage of IOL injectors in three generations from the same manufacturer using the self-developed system—the Heidelberg Score for IOL Injector Damage. Setting David J Apple Center for Vision Research, Department of Ophthalmology, University Hospital Heidelberg, Heidelberg, Germany Design Experimental laboratory study Methods The nozzle tip damage of three injector models (Emerald, iTec, and Simplicity) was determined using the Heidelberg score for IOL injector damage. Damage to the nozzle tip was examined under a microscope and graded as follows: no damage (score 0), slight scratches (1), deep scratches (2), extensions (3), cracks (4) and bursts (5). The total scores for each injector system were the sum of scores for all injectors in this model. Total scores of the three injector systems were evaluated and compared. The nozzle tip parameters (diameters, tip angles) were also measured in each group. Results The Emerald system achieved the highest total scores, while the other two systems achieved similar total scores. There was no statistically significant difference in the total scores between the study groups ( P > 0.05). The outer cross-sectional diameters were 2.10 and 2.10 mm for Emerald, 1.80 and 1.78 mm for iTec, and 1.78 and 1.80 mm for Simplicity. The thickness of the nozzle tips was 0.13 mm (Emerald), 0.17 mm (iTec) and 0.17 mm (Simplicity). The tip angle for three injector models was 35° (Emerald), 45° (iTec), and 45° (Simplicity). Conclusions Although different injector models exhibited varying degrees of damage to the nozzle tip, all injector models generally showed relatively good results. Newer generations of IOL injector models tend to perform better in terms of nozzle tip damage after IOL implantation.