Analysis of the effect of heating rate on pyrolysis kinetics and product composition of copper-containing waste circuit boards

Pyrolysis is a cost-effective and environmentally benign method for recycling organic waste, which can be converted into high-energy gases and oils. Pyrolysis technology was employed in this study to recycle copper-containing discarded circuit board material and recover copper, glass fibers, and gases and oils with high calorific values. Thermogravimetric analyses (TGA), Fourier transform infrared spectroscopy (FTIR), and gas chromatography–mass spectrometry (GC–MS) were used to evaluate pyrolyses of copper-containing waste circuit board materials conducted at different heating rates (5, 10, 20, and 40 °C/min), and the resulting volatiles were studied in detail. The effects of heating rate on the kinetics and activation energies for pyrolyses of copper-containing waste circuit boards were also investigated by using the Coats-Redfern (C-R) method. The TGA curves and FTIR spectra did not differ significantly for different heating rates, and the main functional groups identified with the FTIR results were O–H, C = C, aromatic benzene, substituted benzene, and C–Br. Additionally, GC–MS analyses showed that the heating rate had a great influence on the pyrolysis products formed; the phenol content decreased with increasing heating rate, and the highest content was realized at 5 ℃/min. Energy dispersive spectroscopy (EDS) analyses showed that bromine was removed from the solid phase products during pyrolysis, while copper was effectively enriched in the feedstock. This indicated that pyrolysis can be used to recover copper-containing waste circuit boards.