Biodegradable blends from bacterial biopolyester PHBV and bio-based PBSA: Study of the effect of chain extender on the thermal, mechanical and morphological properties

Being aware of the global problem of plastic pollution, our society is claiming new bioplastics to replace conventional polymers. Balancing their mechanical performance is required to increase their presence in the market. Brittleness of bacterial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) was attempted to be decreased by melt blending with flexible starch-based poly(butylene succinate-co-butylene adipate) (PBSA). An epoxyfunctionalized chain extender was used to enhance interaction between both immiscible biopolyesters. Mechanical performance, morphology, rheology, and crystallization behavior of injection-molded PHBV-PBSA blends (70-30, 50-50, and 30-70 wt%) were assessed in the presence and absence of the chain extender. Crystallization of PHBV was hindered, which was reflected in the improvement of mechanical properties. When PBSA >50 %, the homogeneity of results increased within the same sample while for PHBV-PBSA 70-30 wt% the elongation was 45 % higher. During the flexural test, it changed from brittle to non-breakable. The additive did not change the type of morphology developed by each blend nor the toughening mechanisms, so impact strength was barely affected. However, it reduced the size of dispersed phase domains due to a viscosity change, improving their processability. The higher the PHBV in the blend, the higher the effect of the chain extender.