Experimental investigation on static compressive toughness of steel fiber rubber concrete

Recycled rubber particles can be produced by using waste tires. Adding recycled rubber particles to concrete can form rubber concrete (RC). RC can not only reduce the amount of natural sand and reduce the cost of concrete but also improve the static compressive toughness of concrete. Adding steel fiber into RC can improve the strength of concrete. In order to study the compressive toughness of steel fiber rubber concrete (SFRC), rubber particles washed with NaOH are added to steel fiber reinforced concrete. This can enhance the bonding performance between the recycled rubber particles and concrete. The volume ratio of recycled rubber is 5, 10, and 15%. Prismatic and cubic test blocks were prepared and their compressive tests were carried out. The results show that the stress interaction between the rubber particles and steel fiber in concrete significantly improves the compressive strength, elastic modulus, and stress-strain relationship of concrete. The compressive toughness and ductility of concrete are improved. When the content of rubber particles is 15-20%, the compressive toughness of SFRC is improved most obviously. Through experiments, the toughness index and specific toughness of rubber steel fiber reinforced concrete are calculated, which explores a new way and method for studying the compressive toughness of similar recycled material concrete.