Physical and Mechanical Properties of Plywood Produced with Thermally Treated Pinus taeda Veneers

Plywood is a structural composite mainly applied in construction. For this purpose, some sort of preservative treatment is recommended to increase its durability. One option of the available treatments is heat treatment, which promotes the modification of the wood properties. This treatment is carried out on the final product (plywood), because it can reduce strength if applied to the veneers. However, no study has proven such a reduction. Therefore, the aim of this work was to evaluate three different temperatures (160 degrees C, 180 degrees C and 200 degrees C) of the heat treatment on the veneer surface and on the physical properties (specific gravity, moisture content and swelling in thickness) and mechanical properties (MOE and MOR in static bending) of Pinus taeda plywood. A reduction was observed in the roughness of the veneer's surfaces and the total extractives content changed, with a minimum value reached in the 160 degrees C treatment. The plywood specific gravity initially increased with the heat treatment and did not change at higher temperatures, moisture content reduced, and thickness swelling was not affected. There was no change in the mechanical properties of the plywood, evidencing that the veneer heat treatment does not prejudice mechanically the final product.