Effects of Strands Geometry on the Physical and Mechanical Properties of Oriented Strand Boards (OSBs) Made from Black Spruce and Trembling Aspen

Black spruce is widely used for lumber production in Eastern Canada, and it has the potential to replace trembling aspen and paper birch for oriented strand board (OSB) manufacturing. This study evaluated the bending modulus of elasticity (MOE) and modulus of rupture (MOR), the internal bond (IB), and the thickness swelling (TS) of OSB panels made from black spruce and trembling aspen strands and how they were affected by strand geometry. All the panels met the CSA O437 (1993) standard for class O-2 properties except for the TS. The strand thickness had a significantly negative effect on the bending properties but a significantly positive effect on the IB and TS properties. The strand length had a significantly positive effect on the parallel bending properties but a significantly negative effect on the perpendicular bending properties and the IB, except for the TS. The OSB panels made from aspen obtained better bending properties, while the IB and TS properties were lower than those of the OSB black spruce panels. The results indicate that black spruce strands obtained from the Eastern Canadian softwood lumber industry are suitable for OSB production, but more work is required to reduce the TS.