Validation and application of numerical modeling for in-vessel melt retention in corium pools

In a hypothetical severe accident scenario in light water reactors (LWR), after the loss of primary coolant, the melted core moves to the lower plenum of the reactor pressure vessel and accumulate there. The melted core cautiously releases the decay heat which forms a pool of melted core, called corium, and turbulent natural convection starts. The decay heat transferred by the corium to the vessel may result in vessel failure due to the focusing effect in the absence of an effective cooling system. A numerical analysis is carried out using STAR-CCM+ commercial software to investigate the ability of the existing turbulence models and Algebraic Heat Flux Model (AHFM) to simulate the natural convective heat transfer phenomena in the corium pools. Efforts have been made to predict the BALI experimental results which are designed to simulate the heat transfer in corium pools, in the framework of severe accident studies. For BALI experiments various test campaigns are run varying the internal Rayleigh number, the viscosity of the simulant fluid, and test facility height. Various such experimental cases are verified and compared with numerical simulations. Temperature profiles along a vertical line, surface heat flux along the curved surface, average Nusselt number on the top, and curved surfaces are estimated. The effect of wall boundary conditions on heat transfer is analyzed. The numerical analysis is extended to Pressurized Water Reactor (PWR) and Boiling Water Reactor (BWR) geometries. The CFD analysis predicts the stratified zone and upper mixing zone very well, and the temperature profiles and average heat transfer values are in agreement with the experiments.