Physicochemical Characterization of a Cellulosic Film Modified with Two Room-Temperature Ionic Liquids

Applied Sciences(2022)

引用 1|浏览1
暂无评分
摘要
Changes in the physicochemical characteristics of a regenerated cellulose (RC) film due to a surface modification with room-temperature ionic liquids (ILs) are determined. Two ILs (1-butyl-3-metylimidazolium hexafluorophosphate and tricaprylmethylammonium chloride) were selected, and film surface modification was performed by a dip-coating process (1 h) in the corresponding IL. The surface characterization of the RC/IL films was carried out by XPS at various take-off angles (from 15° to 75°), while the modification of mechanical properties was established by tensile analysis, obtaining a significant increase for the Young modulus of both RC/IL films when compared with the RC-support. Optical characteristics of the RC/IL films were determined by transmittance and reflectance measurements for wavelengths covering visible and near-infrared regions, while impedance spectroscopy (IS) measurements allow us to estimate the electrical changes in the RC/IL films. These results show the high transmittance of both RC/IL films (>90%) with slight differences depending on the IL in both optical regions, while the IS data analysis indicated a conductivity reduction and dielectric constant increase in the dielectric constant for both eco-friendly RC/IL films.
更多
查看译文
关键词
film modification, ionic liquids, XPS, mechanical effect, optical and electrical changes
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要