Automated sample preparation and analysis by gas chromatography tandem mass spectrometry (GC–MS/MS) for the determination of 3- and 2-monochloropropanediol (MCPD) esters and glycidol esters in edible oils

The potentially carcinogenic process contaminant 3- and 2-monochloropropanediol esters (2-MCPD and 3-MCPD esters) and glycidyl esters (GEs) are under study in refined oils and foodstuffs. Legislation set recommended total daily intake (TDI) for 3-MCPD of 0.8 µg/kg and as low as reasonably achievable (ALARA) for glycidol. Usually, the so far adopted method for the determination of these contaminants relay on numerous and time-consuming steps for sample preparation (AOCS methods) and on GC–MS detection.The obtained sensitivities and the number of processable samples are thus limited. In this optic, new reliable methods that allow for the fast and sensitive determination of these contaminants in edible oils may be considered an improvement of the overall strategy of tackling the problem. In this paper a new automated method for sample preparation and detection by GC–MS/MS is presented and validated. Data on sensitivity (LOD at 1.5, 2.2 and 3 ng/g for 3-MCPD, 2-MCPD, 3-MBPD (deriving from glycidol), respectively), linearity across low and high calibration ranges and precision showed to be fit-for-purposes. Finally, the methodology was applied to ten extra virgin oil samples and one sample of sunflower seeds oil.