Wide-angle broadband antireflection coatings with nano-taper hydrated alumina film

Wide-angle and broadband antireflection (AR) coating is of the essence in modern optical systems in many fields, which has a great influence on the stray light and imaging quality. A simple and convenient manufacturing method is proposed to address this issue based on a composite coating combining the nano-tapered Al2O3 center dot xH(2)O (AH) structure and high-low index thin film stack. The optical properties of nano-tapered AH structure at various thickness are first studied and modeled in optics by several homogeneous sub-layers with the graded equivalent index. The designed composite AR coatings are manufactured by vacuum deposition and wet etching subsequently in the hot deionized water. Compared to the common dielectric multilayer antireflection stack, the composite coating presents excellent AR performance. The measured average reflectance values of the double-side coated BK7 glass are as low as 0.40%, 0.41%, 0.56% and 3.13% in 400-1100nm band at angles of incidence (AM) of 6 degrees, 20 degrees, 40 degrees, and 60 degrees, respectively, while the measured average transmittance at normal incidence increases up to 99.3%. Finally, the process reproductivity, environmental reliability test including long term storage, high temperature annealing and 85 degrees C-85% relative humidity storage of the composite coatings are evaluated. The proposed AR scheme provides a low-cost, efficient, wide-angle and broadband AR coating for kinds of large-curvature components and complex surfaces in fields of consumer electronics, automotive, security, etc. (C) 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement