Tribological and Viscoelastic Behaviour of Jute, Prosopis Juliflora Bark and Kenaf Fibers Reinforced Polyester Hybrid Composites for Engineering Applications

Utilizing biomaterials for every conceivable purpose area, such as automobiles, sporting goods, medical, civil, and textile industries, is the aim of the research field. Applications of Natural Fiber (NF) reinforced polymer composites in structural and tribological engineering are rapidly expanding. For the first time in this work, Prosopis juliflora bark and two different types of NF (jute and kenaf) were reinforced with polyester matrix by the hand layup method. The objective of the work is to determine the wear performance and viscoelastic properties of the new hybrid bio-composite. Under dry contact conditions, the tribological performance of the proposed hybrid composite material was evaluated using a range of process parameters, including sliding distance (1000-2000 m), applied load (10-50 N), and sliding velocity (1-5 m/s). The wear behaviour of the fabricated NF composite was greatly enhanced (17.5 x10-8 mm3 /N-mm) by the higher composition of kenaf fibers has been observed. The dynamic mechanical analysis (DMA) showed that the manufactured composites had high storage modulus (4.1 GPa) and loss modulus (3.8 GPA). SEM was used to investigate and propose a potential wear mechanism for the developed composites by evaluating the exterior geomorphology of samples after wear tests. AFM provided details on the fiber surface properties of hybrid composites.