Analysis of Initial Cracking of an Interface between a Bundled Lipped Channel-Concrete Composite Wall and an Infill Wall

The bundled lipped channel-concrete (BLC-C) composite wall structure is a new structure with several advantages such as a high bearing capacity and good seismic performance. However, interface cracks between a BLC-C composite wall and the infill wall (non-structural wall) are a severe problem and need to be urgently resolved. Interface cracks affect not only the esthetics, but also the normal use of a building. The presence of interface cracks changes the perceptions of the owners of a structure, forcing them to question its safety and even take legal action against its developer. Therefore, in this study we aimed to investigate the initial cracking of the interface between a BLC-C composite wall and an infill wall. Unidirectional horizontal loading tests were conducted on two infill wall specimens constrained by BLC-C composite walls on both sides. The finite element analysis software ANSYS was used to simulate the loading process of the tests. The test results were compared to verify the accuracy of the finite element model. A finite element analysis was conducted to determine the effect of the horizontal displacement of the specimens when the interface initially cracked under different parameters such as the widths of the BLC-C composite wall, infill wall, and opening as well as the strength grade of the bricks and maximum normal contact stress. The results showed that a decrease in the width of the BLC-C composite wall or a rise in the width of the infill wall delayed the appearance of interface cracks. A large opening also delayed the occurrence of interface cracks. An enhancement in the strength grade of the bricks led to an earlier appearance of interface cracks. Interface cracks occurred later with an increase in the maximum normal contact stress between the BLC-C composite wall and the infill wall.