Backscatter Communication Assisted by Reconfigurable Intelligent Surfaces

In a backscatter communication system, the backscatter device (BD) transmits its messages to the backscatter receiver (BR) by reflecting the incident signal from an external radio frequency (RF) emitter, instead of using power-hungry active RF components themselves. Thus, backscatter communication has shown great potential for achieving low-power communication. The double-fading effect associated with the backscatter link, however, is a major limiting factor to achieve efficient backscatter communication. Reconfigurable intelligent surfaces (RISs), a recently developed technology, can be applied at the BD to enhance the backscatter link thanks to the fact that both RIS and backscatter communication share the same reflective principle. Such a design can also allow the backscatter communication system to capture the desired RF signal as a reflective carrier in a complex radio environment. In this article, a comprehensive overview of backscatter communication assisted by RIS is given. We first introduce the basics of backscatter communication, which covers the antenna scattering principle, backscatter modulation, and link budget calculation. Then, the details of RIS are discussed, which include antenna-based RIS and metamaterial-based RIS, followed by the discussion of the roles of RIS in backscatter communication. After that, we provide an overview of three types of backscatter communication systems assisted by RIS, including RIS-assisted unmodulated backscatter communication, RIS-assisted ambient backscatter communication, and RIS-assisted symbiotic radio. Emerging applications of these systems, technical challenges, and future opportunities in this emerging field are also presented.