Optimizing distortion product otoacoustic emission recordings in normal-hearing ears by adopting cochlear place-specific stimuli

Distortion product otoacoustic emissions (DPOAEs) provide a window into active cochlear processes and have become a popular clinical and research tool. DPOAEs are commonly recorded using stimulus with fixed presentation levels and frequency ratio irrespective of the test frequency. However, this is inconsistent with the changing mechanical properties of the cochlear partition from the base to the apex that lend specific frequency-dependent spatial properties to the cochlear traveling wave. Therefore, the frequency and level characteristics between the stimulus tones should also need to be adjusted as a function of frequency to maintain optimal interaction between them. The goal of this investigation was to establish a frequency-specific measurement protocol guided by local cochlear mechanics. A broad stimulus parameter space extending up to 20kHz was explored in a group of normal-hearing individuals. The stimulus frequency ratio yielding the largest 2f(1)-f(2) DPOAE level changed as a function of frequency and stimulus level. Specifically, for a constant stimulus level, the frequency ratio producing the largest DPOAE level decreased with increasing frequency. Similarly, at a given f(2) frequency, the stimulus frequency ratio producing the largest DPOAE level became wider as stimulus level increased. These results confirm and strengthen our current understanding of DPOAE generation in the normally functioning cochlea and expand our understanding to previously unexamined higher frequencies. These data support the use of frequency- and level-specific stimulus frequency ratios to maximize DPOAE generation.