Effects of trace ytterbium addition on microstructure, mechanical and thermal properties of hypoeutectic Al–5Ni alloy

Over the past decade, the cast aluminum alloys with excellent mechanical and conductivity properties have emerged as potential materials for thermal management. However, the traditional Al–Si based alloys are difficult to make significant breakthrough in conductivity performance. The hypoeutectic Al–5Ni alloy also possesses sound castability and is expected to be applied in thermal management applications. In this study, the effects of ytterbium (Yb element) at 0–0.5 wt% on the microstructures as well as the electrical/thermal conductivity and mechanical properties of the Al–5Ni alloy were systematically investigated. The experimental results indicate that the addition of Yb at a relatively low amount not only reduces the secondary dendrite arm spacing of the α-Al grains, but also modifies the morphology and distribution of eutectic boundary phase. Moreover, it is found that the dosage of Yb at 0.3 wt% in the Al–5Ni alloy can simultaneously improve the yield strength, ultimate tensile strength and electrical/thermal conductivity. The strengthening and toughening of the Al–5Ni alloy are mainly attributed to the decrease of secondary dendrite arm spacing and the improvement of eutectic phases. The transmission electron microscopy/selected area electron diffraction (TEM/SAED) analysis indicates that the ytterbium in Al–5Ni alloy will form Al3Yb phase, which mainly agglomerates in the Al3Ni phase region. This phase is helpful to decrease the solubility of impurity elements (e.g., Fe and Si) in the α-Al matrix, which is beneficial to electrical/thermal conductivity. The value of this study lays foundation for manufacturing Al–Ni alloys with high thermal conductivity and acceptable mechanical properties.