Experimental comparison of performance and emission characteristics of 4-stroke CI engine operated with Roselle and Jatropha biodiesel blends

The environmental degradation, combined with the continuous depletion of the world's fossil fuel reserves, has forced the search for alternative fuels. This study was performed to investigate the performance of novel biodiesels in the CI engine. The experiments were performed at three different compressions ratios (16:1, 17:1, 18:1) and four loading conditions (25%, 50%, 75%, 100%). Different types of fuels such as jatropha biodiesel (JB), roselle biodiesel (RB), and ternary biodiesel (TB) were prepared and analyzed. The thermal performance of different fuels was analyzed in terms of brake thermal efficiency (BTE), brake specific fuel consumption (BSFC), and exhaust gas temperature (EGT). The emission characteristics such as CO2 emission, NOx emission, and smoke emission were analyzed for all types of fuels. The results of these fuels in the engine were compared with mineral diesel (MD). The BTE was increased with increasing compression ratios and loads for all types of fuels. The BSFC was increased with increasing compression ratios but decreased with increasing loads. The increase in emission of NOx was observed at higher compression ratios and loads. However, the CO2 emission was decreased at higher loads and lower compression ratio. The performance curves achieved with a 20% jatropha biodiesel blend showed results that were approximate to those obtained with pure MD. The comparative analysis between different fuels showed that JB exhibit higher thermal performance as compared to other biodiesels. Therefore, JB can be a better alternative to conventional fuel.