An Innovative Acid Diversion Using In-Situ Foam Generation: Experimental and Successful Field Application

Abstract In carbonate reservoirs, effective acid stimulation is essential to overcome reservoir damage and mainline high oil production. Recently, most of oil wells are being drilled horizontally to maximize production. Acid stimulation of horizontal wells with long intervals require very effective acid diversion system. If the diversion system is not efficient enough, most of the acid will be leaking-off near the casing shoe, in openhole well, which will result in a fast water breakthrough and diminish production. This study describes a breakthrough treatment for acidizing long horizontal wells in carbonate formations. The novel technology is based on in-situ foam generation to divert the acid. Gas diversion, as a foam, is a perfect diversion mechanism as gas creates pressure resistance which forces the acid stages to be diverted to new ones?. The diversion will not require the acid to be spent, compared to viscoelastic diverting system. Moreover, no gel is left behind post treatment, which will eliminate any damage potential. The system is not impacted with the presence of corrosion products, where diverting system will not function without effective pickling and tubular cleanup. Lab results showed that the new in-situ foam generation system was very effective on both dolomite and calcite cores. The system creates high back pressure when foam is generated, which significantly diverts the acid stages to stimulate other intervals. Moreover, the new system minimizes acid leak-off and penetration. Open completing the job, the foam collapse leaving no left behind any damaging material. Field application of the in-situ foam generating system showed high success rate and outperformed other diversion mechanisms. The well gain was up to 18 folds of the original well injectivity.