Acoustic Wave-Driven Liquid Metal Expansion

In this paper, we report a volume expansion phenomenon of a liquid metal droplet naturally oxidized in an ambient environment by applying an acoustic wave. An oxidized gallium-based liquid metal droplet was placed on a paper towel, and a piezo-actuator was attached underneath it. When a liquid metal droplet was excited by acoustic wave, the volume of liquid metal was expanded due to the inflow of air throughout the oxide crack. The liquid metal without the oxide layer cannot be expanded with an applied acoustic wave. To confirm the effect of the expansion of the oxidized liquid metal droplet, we measured an expansion ratio, which was calculated by comparing the expanded size in the x (horizontal), y (vertical) axis to the initial size of the liquid metal droplet, using a high-speed camera. For various volumes of the droplet, when we applied various voltages in the range of 5 similar to 8 Vrms with 18.5 similar to 24.5 kHz using the piezo-actuator, we obtained a maximum expansion ratio of 2.4 in the x axis and 3.8 in the y axis, respectively. In addition, we investigated that the time to reach the maximum expansion in proportion to the volume size of liquid metal differed by five times from 4 s to 20 s, and that the time to maintain the maximum expansion differed from 23 s to 2.5 s, which was inversely proportional to the volume size. We also investigated the expansion ratios depending on the exposure time to the atmosphere. Finally, a circuit containing LED, which can be turned on by expanded liquid metal droplet, was demonstrated.