Genetic algorithm assisted bridge fiber design and fabrication for few-mode multi-core fiber Fan-in/Fan-out device

We present a rapid and precise method to design the multiple step-index bridge fiber for ultra-low insertion loss few-mode multi-core fiber Fan-in/Fan-out device. The genetic algorithm is applied to optimize the structural parameters to support multi-mode operation. Based on the proposed intelligent iteration platform, core-based multiplex/demultiplex optimization can be achieved with less than 1.0 dB insertion loss for the first 6 LP modes in space division multiplexing system consisting of few-mode multi-core fibers. Besides, we have successfully drew the designed bridge fiber and fabricated the corresponding Fan-in/Fan-out device. When connecting it with the single-core 6-mode fiber and 7-core 6-mode fiber, the average insertion losses of mode LP01, LP11a, LP11b, LP21a, LP21b, and LP02 are 0.88 dB, 1.11 dB, 1.07 dB, 1.42 dB, 1.33 dB, and 1.04 dB, respectively. (C) 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement