Efficient flotation recovery of lead and zinc from refractory lead-zinc ores under low alkaline conditions

In this study, a new flotation approach, a low-alkaline and non-desliming process, was introduced for improving lead and zinc recoveries, lowering production cost and reducing environmental pollution. Lab-scale experiments results show that the new process contributed to the flotation of the complex mixed sulfide-oxide lead and zinc ore regarding two aspects: (1) High alkaline process (pH = 12±) was replaced by low alkaline process (pH = 9±) by using collector WS (a mixture of ethyl thiocarbamate, ammonium dibutyldithiophosphate and dithiophosphate-25) and combined depressant Na2S/ZnSO4/Na2SO3 for lead sulfide flotation; (2) Non-desliming process was successfully achieved by using collector MA (a mixture of ether amine, hydroxyethyl cellulose and polyacrylic acid) and combined depressant SHP/SS (sodium hexametaphosphate/sodium silicate) for zinc oxide flotation. And 43.37% Pb in the Pb concentrate was recovered, the corresponding Pb grade was 52.73%, total 84.42% Zn was recovered by the flotation of zinc sulfide minerals and zinc oxide minerals. Moreover, the two aspects of the new approach were systematically verified from lab-scale to industrial-scale application. The industrial-scale flotation tests show that Pb recovery in Pb concentrate increased by 1.86% compared with that of original system during industrial-scale tests period, and the Pb recovery increased by 4.09% compared with that of original system before industrial-scale tests period, while the Zn operating recovery in zinc oxide concentrate improved by 19.52%. Moreover, the total reagent cost of the whole new process significantly declined by 3.93 yuan per ton of ore.