An Experimental Study on Properties of Ternary Blended Steel Fibre Reinforced Concrete

K. Mohamed Shameer, S. S. Jayaaruna,P. N. Raghunath,K. Suguna

INTERNATIONAL TRANSACTION JOURNAL OF ENGINEERING MANAGEMENT & APPLIED SCIENCES & TECHNOLOGIES(2021)

引用 1|浏览2
暂无评分
摘要
This research presents the mechanical properties of ternary blended concrete incorporating steel fibres. Cement was replaced by GGBS (Ground Granulated Blast furnace Slag) and Nano Silica. Replacing with GGBS 35% and Nano silica 1% was found to give the optimum combination. Hooked end steel fibres of aspect ratio 75 in different volume fractions of 0.5%, 1%, 1.5%, 2% were added to the ternary blended concrete. Compressive strength test, Flexural strength test, and elasticity modulus test were conducted to study the mechanical properties of ternary blended concrete. The test results show that micro reinforcement concrete with GGBS and Nano silica execute well compared to the control sample. The addition of steel fibres improves the ductility and performance of concrete. (C) 2021 INT TRANS J ENG MANAG SCI TECH.
更多
查看译文
关键词
Compressive strength, Flexural strength, Modulus of elasticity, GGBS, Nano silica, Hooked End Steel Fibre, Elasticity modulus test, Failure pattern
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要