The Study of Biological Glue Droplet Impact Behavior of Bioceramic Powders Applied in 3D Printing of Bone Scaffolds

This paper aims to develop a reliable and effective model to investigate the behavior of micron-sized biological glue droplets impacting micron-sized bioceramic powder beds applied to the 3D printing process. It also endeavours to explore the common rules of droplet impact affected by particle size and the wettability of powder, which are supposed to provide process parameters guidance for the application of new materials in 3D printing. Firstly, based on the low impulse impact model, the simplified model was proposed. Then, the observation and simulation experiments of millimeter-scale droplet impacting were carried out under the same conditions to prove the effectiveness of the model. Furthermore, the characterization of a parametric experiment of a 3D printing practice was used to verify the significance and effectiveness of the simulation study method. Lastly, the method was performed to investigate the effect of wettability and particle size of the micron powder on the micron droplet impact. The results showed that the binder powder's wettability and particle size could directly influence the droplet spreading behavior. The characterization results of samples printed in the simulation-predicted parameter showed that the amount of binder used could be reduced by 38.8~50.1%, while the green strength only lost 17.9~20%. The significance of this simulation method for prediction of 3D printing process parameters was verified.