GF(q) LDPC encoder and decoder FPGA implementation using group shuffled belief propagation algorithm

This paper presents field programmable gate array (FPGA) exercises of the GF(q) low-density parity-check (LDPC) encoder and interpreter utilizing the group shuffled belief propagation (GSBP) algorithm are presented in this study. For small blocks, non-dual LDPC codes have been shown to have a greater error correction rate than dual codes. The reduction behavior of non-binary LDPC codes over GF (16) (also known as GF(q)-LDPC codes) over the additive white Gaussian noise (AWGN) channel has been demonstrated to be close to the Shannon limit and employs a short block length (N=600 bits). At the same time, it also provides a non-binary LDPC (NB-LDPC) code set program. Furthermore, the simplified bubble check treasure event count is implemented through the use of first in first out (FIFO), which is based on an elegant design. The structure of the interpreter and the creation of the residential area he built were planned in very high speed integrated circuit (VHSIC) hardware description language (VHDL) and simulated in MODELSIM 6.5. The combined output of the Cyclone II FPGA is combined with the simulation output.