Impact of temperature, inoculum flow pattern, inoculum type, and their ratio on dry anaerobic digestion for biogas production

This study is aimed to apply dry anaerobic digestion (DAD) for methane (CH 4 ) enriched biogas production from unsorted organic municipal solid waste (MSW). Cumulative biogas production was monitored for 35 days of operation in batch digesters at fixed feedstock to inoculum (F/I) ratio 2. Anaerobic sludge (AS) and cow manure (CM) were used as inoculum in single and mixed modes. Several process parameters such as inoculum flow pattern (single layer, multilayer, and spiral), digestion temperature (25 to 40 °C), inoculation modes (single and mixed mode), and inoculation proportion (AS:CM = 1:1, 1:2, 1:3, and 2:1) were investigated to determine the optimum DAD conditions to maximize the CH 4 laden biogas yield. The study of inoculum flow pattern showed that digester with multilayer inoculum configuration generated the maximum 555 mL cumulative biogas with the production rate of 195 mL/day (at 25 °C). Biogas production rate and cumulative biogas production were found to increase with a rise in temperature and the maximum values of 380 mL/day and 1515 mL respectively were observed at 37 °C. The mixed mode of inoculation containing AS and CM augmented the biogas yield at previously optimized conditions. Final results showed that digester with multilayer inoculum flow pattern at 37 °C produced 1850 mL cumulative biogas with 1256.58 mL CH 4 /kg volatile solid (VS) when the mixed inoculum was used at the AS:CM—1:2 ratio. Biogas production with this significant amount of CH 4 justifies the use of the DAD process for energy (biogas) generation from widely available biomass feedstock (MSW), offering various advantages to the environment.