NIR red luminescent doped Ag center dot(Y0.95Eu0.05)(2)O-3 nanocomposite for 3-Chlorophenol sensor probe and anti-MDR bacterial application

Journal of environmental chemical engineering(2021)

引用 1|浏览0
暂无评分
摘要
Nanocomposite, Ag center dot(Y0.95Eu0.05)(2)O-3 was characterized by XRD, SEM, EDS, TEM, FTIR and PL. Cubic morphology of Ag center dot(Y0.95Eu0.05)(2)O-3 nanocomposite was observed with an average crystallite size of 43.78 nm. The materials showed excellent low temperature NIR red PL properties at 100 K, when excited by HeCd laser at 325 nm. The materials exhibited remarkable biological properties against MDR bacteria. The proposed sensor was assembled by depositing Ag center dot(Y0.95Eu0.05)(2)O-3 nanocomposite on the flat part of a GCE to result a thin layer of nanocomposite and the sensor was applied to detect 3-CP in buffer solution in an electrochemical approach. To evaluate the sensor performances, the sensor calibration by plotting current versus concentration of 3-CP is executed, where currents data are distributed on a line from 0.1 nM to 0.01 mM defined as linear dynamic range (LDR) for 3-CP detection in buffer solution. The sensitivity of 3-CP sensor is calculated based on the slope of LDR considering the active surface area of GCE, which is equal to 23.5189 mu A mu M-1 cm(-2). The limit of detection (LOD) is calculated from the signal/noise ratio of 3, which is equal to 40.37 +/- 2.02 pM. Besides this, the sensor parameters including reproducibility, response time and stability for long-time performance are evaluated in detail and found as reliable. Moreover, the real-time applicability of 3-CP sensor is tested by the electrochemical analysis of collected samples from environmental sources.
更多
查看译文
关键词
Ag center dot(Y0.95Eu0.05)(2)O-3 nanocomposite, 3-Chlorophenol sensor, Glassy carbon electrode, Electro-chemical approach, Sensitivity, Real sample analysis
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要