Novel Bending Sensor Based on a Solution-Processed Cu2O Film with High Resolution Covering a Wide Curvature Range

A Cu2O film is prepared on a flexible polyethylene terephthalate substrate for a bending sensor using the spin-spray method, a facile and low-environmental-load solution process. The Cu2O bending sensor shows high sensitivity and high resolution not only over a wide range of curvatures (0 < kappa < 0.21 mm(-1)) but also for very small curvature changes (Delta kappa = similar to 0.03 mm(-1)). The bending response of the sensor exhibited a curvature change of high linearity with a good gauge factor (18.2) owing to the grainboundary resistance and piezoresistive effects of the fabricated Cu2O film. In addition, the sensor possesses good repeatability, stability, and long-term (>30 days) and mechanical fatigue durability (1000 bending-release cycles). The sensor is capable of detailed monitoring of large- and small-scale human motions, such as finger bending, wrist bending, nodding, mouth opening/closing, and swallowing. In addition, excellent stability and repeatability of the monitoring performance is observed over a wide range of motion angles and speeds. All of these results demonstrate the potential of the flexible bending sensor based on the Cu2O film as a candidate for healthcare monitoring and wearable electronics.