Channel Modeling And Optimization Of Leaky Coaxial Cable Network In Coal Mine Based On State Transition Method And Particle Swarm Optimization Algorithm

As a continuous antenna, the leaky coaxial cable (LCX) is widely used in wireless communication of closed or semi-closed areas such as the subway, mine, tunnel, etc. Usually, LCX networks are required in coal mines. Its channel characteristics are of great significance to mobile communication and mine safety. This paper presents an effective channel modeling and optimization method that combines the state transition and the particle swarm optimization (PSO) algorithms for the LCX network. First, a channel model can be established with a few parameters based on the state transition method, which can describe the complex transfer function of the LCX network; then, taking the transfer characteristics of the LCX network as the optimization objective, which should be consistent with the measured results. And the established objective function is optimized and designed with the PSO algorithm. Finally, the proposed method is validated by comparing the measured results and the model-based simulations on two test LCX networks. The experimental results show that the absolute error between the proposed model and the measurement model is less than that of other models at any frequency point. The proposed model can accurately obtain all responses between point-to-point channels at one time. It will help to accurately obtain the performance of different LCX networks and help to detect and locate faults in future studies.