Co content dependence on the microstructure characteristic and creep performance at elevated temperature in Ru-containing single crystal superalloys

The composition design and optimization of Ru-containing fourth generation single crystal superalloys, which are currently considered as the most advanced and practical materials for manufacturing high-pressure turbine blades of aero-engines, have been in increasing and urgent demands. In this work, significant adjustments to the pivotal alloying element Co were made and the synthetic effect of Co on the microstructure as well as high-temperature creep property in Ru-containing alloys were systematically evaluated. The results illustrated that the size of γ′ phase was inversely proportional to the Co content but the volume fraction of γ′ precipitates stayed the same in different alloys. The TCP phases were more likely to precipitate in alloys with lower or extremely high Co addition during long-term aging, while the morphology of these particles transformed from long needle-like to short rod-like or blocky as Co content increased. It was noted that the element diffusion as well as the resultant coarsening and rafting of γ/γ′ structures were favorably facilitated by the increasing Co addition. The alloy with 12 wt% Co exhibited the longest stress rupture life at 1140 °C/137 MPa, regardless of the moderate precipitation of blocky TCP particles during creep. Moreover, the TCP phases in different alloys were analyzed to be typical μ phase but the specific element distributions varied with Co addition. Moreover, plenty of 2nd γ′ precipitates were observed after creep rupture, while their nucleation and precipitation could be affected by the Co addition in alloys. Ultimately, the comprehensive Co-effect was discussed and the optimum Co content was determined, in order to provide further guidance in the design and development of Ru-containing single crystal superalloys.