Injection Vs Micro-Injection Molding Of Nano-Particle Filled Polyamide 6: Moldability And Structuring

In this work, the moldability via micro-injection molding (mu IM) of nano-filled polyamide 6 (PA6) based systems and the microstructural characteristics of the micro-injected parts were investigated and compared to those observed via traditional injection molding (IM). Two types of nano-fillers, different in nature and geometry, were examined, namely carbon nanotubes and silicate layers. The presence of nano-fillers did not impair the mold replication capability of PA6 in the mu IM process. A micro-rib and a standard dumbbell specimen for tensile tests were used as reference micro- and macro-injected part, respectively. Transmission Electron Microscopy, Wide and Small Angle X-ray Scattering and Differential Scanning Calorimetry analyses showed that, due to the different thermomechanical histories during mu IM and IM, the micro- and the macro-parts have different microstructures, influenced also by the filler type. Both nano-filler dispersion and PA6 crystallinity were influenced.