Empowering Electroless Plating To Produce Silver Nanoparticle Films For Dna Biosensing Using Localized Surface Plasmon Resonance Spectroscopy

To facilitate the implementation of biosensors based on the localized surface plasmon resonance (LSPR) of metal nanostructures, there is a great need for cost-efficient, flexible, and tunable methods for producing plasmonic coatings. Due to its simplicity and excellent conformity, electroless plating (EP) is well suited for this task. However, it is traditionally optimized to produce continuous metal films, which cannot be employed in LSPR sensors. Here, we outline the development of an EP strategy for depositing island-like silver nanoparticle (NP) films on glass with distinct LSPR bands. The fully wet-chemical process only employs standard chemicals and proceeds within minutes at room temperature. The key step for producing spread-out NP films is an accelerated ripening of the silver seed layer in diluted hydrochloric acid, which reduces the nucleation density during plating. The reaction kinetics and mechanisms are investigated with scanning (transmission) electron microscopy (SEM/STEM), X-ray photoelectron spectroscopy (XPS), and UV-vis spectroscopy, with the latter enabling a convenient live monitoring of the deposition, allowing its termination at a stage of desired optical properties. The sensing capabilities of chemically deposited NP films as LSPR transducers are exemplified in DNA biosensing. To this end, a sensing interface is prepared using layer-by-layer (LbL) buildup of polyelectrolytes (PE), followed by adsorption and covalent immobilization of ssDNA. The obtained LSPR transducers demonstrate robustness and selectivity in sensing experiments with binding complementary and unrelated DNA strands.