Performance Evaluation Of Hybrid Coagulation/Nanofiltration Process For At-Pome Treatment

The presence of lignin and its degraded products such as tannin and humic acids is the main reason causing the aerobically-treated palm oil mill effluent (AT-POME) to display colour at the point of discharge. In this work, a hybrid method is employed to treat the AT-POME sample that was conventionally treated by biological method. This hybrid method that combines coagulation and nanofiltration (NF) membrane is used to treat the industrial effluent in which the coagulation is conducted prior to NF process. The effects of several variables during coagulation process, i.e., alum concentration, decolouring polymer dosage, cationic polymer dosage and pH on the colour removal and sludge volume production are investigated in order to determine optimum variable conditions for NF process. Under the optimum coagulation conditions (50 mg/L alum, 441 mg/L decolouring polymer, 534 mg/L cationic polymer and pH 9.2), the results showed 92% colour removal with sludge volume as low as 4.1 mL. Further treatment using commercial NF membranes indicated that a permeate sample with complete elimination of colour (almost 100% removal) could be produced with reasonably high water flux.