International Comparison Of The Determination Of The Mass Fraction Of Cadmium, Chromium, Mercury And Lead In Polypropylene: The Comit, Consultatif Pour La Quantit, De Matisre Pilot Study Ccqm-P106

The CCQM-P106 pilot study was organized by the inorganic working group of the Comit, Consultatif pour la Quantit, de MatiSre (CCQM) as a feasibility comparison to study the applicability of different analysis methods to the polypropylene sample and test the abilities of the participants for measuring the Cd, Cr, Hg and Pb in polypropylene. National Institute of Metrology P.R. China (NIM) acted as the coordinating laboratory of this pilot study. There were 21 laboratories that submitted the final results. The median values of the mass fraction of Cd, Cr, Hg and Pb were 36.12 mg kg(-1) (the median absolute deviation about the median (MADe) = 0.46 mg kg(-1)), 252.5 mg kg(-1) (MADe = 3.4 mg kg(-1)), 387.0 mg kg(-1) (MADe = 10.1 mg kg(-1)) and 466.2 mg kg(-1) (MADe = 8.9 mg kg(-1)), respectively. Isotope dilution mass spectrometry (IDMS), inductively coupled plasma-mass spectrometry (ICP-MS), inductively coupled plasma-optical emission spectrometry (ICP-OES), atomic absorption spectrometry (AAS), instrumental neutron activation analysis (INAA) and X-ray fluorescence (XRF) measurement methods were used, and microwave digestion was used by the most of the participants. In general, very good agreement of the results was observed. Moreover, compared to the results of other methods, the results of IDMS still showed less spread amongst laboratories and had a smaller uncertainty. In addition, the results of some analytes used by XRF and INAA also got satisfactory agreement with the median value.