Laser induced thermal effect on the polymerization behavior in up-conversion particle assisted near-infrared photopolymerization.

Laser induced thermal effect is inevitable in the up-conversion particle assisted near-infrared polymerization (UCAP). In this article, the influence of thermal effect on the polymerization behavior is investigated. The effects of up-conversion particles content and NIR laser intensity on the polymerization rate and surface oxygen inhibition were systematically investigated, and the temperature evolution and complex viscosity changes in the polymerization system during the polymerization process were also monitored. In addition, polymerization experiments conducted on a controlled temperature platform were used to study the effect of NIR heating on the polymerization behavior. The results show that the near-infrared thermal effect promotes the polymerization reaction, but also causes severe oxygen inhibition which has an adverse effect on polymerization. Finally, NIR curing materials with enhanced mechanical properties than those of conventional UV curing materials were obtained.