Zeolite-like performance for xylene isomer purification using polymer-derived carbon membranes.
Proceedings of the National Academy of Sciences of the United States of America(2021)
摘要
Polymers of intrinsic microporosity (PIMs) have been used as precursors for the fabrication of porous carbon molecular sieve (CMS) membranes. PIM-1, a prototypical PIM material, uses a fused-ring structure to increase chain rigidity between spirobisindane repeat units. These two factors inhibit effective chain packing, thus resulting in high free volume within the membrane. However, a decrease of pore size and porosity was observed after pyrolytic conversion of PIM-1 to CMS membranes, attributed to the destruction of the spirocenter, which results in the "flattening" of the polymer backbone and graphite-like stacking of carbonaceous strands. Here, a spirobifluorene-based polymer of intrinsic microporosity (PIM-SBF) was synthesized and used to fabricate CMS membranes that showed significant increases in p-xylene permeability (approximately four times), with little loss in p-xylene/o-xylene selectivity (13.4 versus 14.7) for equimolar xylene vapor separations when compared to PIM-1-derived CMS membranes. This work suggests that it is feasible to fabricate such highly microporous CMS membranes with performances that exceed current state-of-the-art zeolites at high xylene loadings.
更多查看译文
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要