Assessment Of The Physical Compatibility Of Injectable Enrofloxacin With Commonly Used Intravenous Fluids And Drugs During Simulated Y-Port Administration

OBJECTIVETo evaluate physical compatibility of small animal (SAE) and large animal (LAE) injectable formulations of enrofloxacin with select IV fluids and drugs.SAMPLE162 admixtures containing SAE or LAE with saline (0.9% NaCl) solution, lactated Ringer solution (LRS), Plasma-Lyte A (PLA), 6% hydroxyethylstarch 130/0.4 (HES), metoclopramide, or ampicillin-sulbactam.PROCEDURESIn the first of 2 simultaneously conducted experiments, admixtures containing enrofloxacin (10 mg/kg) and a volume of IV fluid that would be administered over a 20-minute period when dosed at the maintenance infusion rate (40 mL/kg/d for saline solution, LRS, and PLA and 20 mL/kg/d for HES) were created. In the second experiment, enrofloxacin (10 mg/kg) was admixed with saline solution (40 mL/kg/d) and metoclopramide (2 mg/kg/d) or ampicillin-sulbactam (30 mg/kg). In both experiments, admixture components were infused into a flask over 20 minutes assuming patient weights of 5, 10, and 20 kg. Admixtures were created by use of undiluted SAE and SAE diluted 1:1 with saline solution and undiluted LAE and LAE diluted 1:1 and 1:10 with saline solution. Admixtures were assessed for physical incompatibility at 0, 15, 30, and 60 minutes after completion of mixing. Physical incompatibility was defined as gross precipitation, cloudiness, Tyndall effect, or change in turbidity.RESULTSAdmixtures containing undiluted SAE or LAE were physically incompatible with saline solution, PLA, LRS, and HES. Because saline solution was used to dilute SAE and LAE, all admixtures containing diluted SAE or LAE were also physically incompatible. Physical compatibility of enrofloxacin with metoclopramide or ampicillin-sulbactam could not be assessed because those admixtures also contained saline solution.CONCLUSIONS AND CLINICAL RELEVANCEEnrofloxacin was physically incompatible with all tested solutions.