Comparative Analysis Of Chopper-Inverter Performances For Wind Conversion System Connected To Grid

PurposeThe purpose of this paper is to propose an efficient current control technique based on model predictive control (MPC) for grid-connected wind conversion system. This nonlinear strategy is applied for the chopper circuit and grid-tied inverter and compared with other two conventional schemes; a traditional proportional-integral (PI) and sliding mode controller (SMC) using the same switching frequency.Design/methodology/approachFirstly, the MPC scheme uses the mathematical model to predict future behaviors of the controlled converter outputs for possible switching states. After that, the optimal voltage vector is selected by minimizing a cost function, which is defined as a sum of the absolute values of the controlled current errors. Then, the corresponding switching signals are applied to the converter switches in the next sampling period to track correctly the reference current. Thus, the MPC scheme ensures a minimal error between the predicted and reference trajectories of the considered variables.FindingsThe MPC-based algorithm presents several benefits in terms of high accuracy control, reduced DC-link voltage ripples during steady-state operation, faster transient response, lower overshoots and disturbance rejection and acceptable total harmonic distortion.Originality/valueThe authors introduce several simulation case studies, using PSIM software package, which prove the reliability and effectiveness of the proposed MPC scheme. Therefore, the MPC performances, during dynamic and steady-state condition, are compared with those obtained by a PI regulator and SMC to highlight the improvements, specifically the transfer of smooth power to the grid.