Rbm: Region-Based Mobile Routing Protocol For Wireless Sensor Networks

Wireless sensor networks (WSNs) are employed for different applications for the reason of small-sized and low-cost sensor nodes. However, several challenges that include a low powered battery of the sensor nodes restrict their functionality. Therefore, saving energy in the routing process to extend network life is a serious concern while deploying applications on WSN. To this end, the key technology is clustering, which helps maximize scalability and network lifecycle. Base station (BS) collects data, aggregates it, and extracts the required information. To obtain the maximum outcome, the lifetime of the network is maximized by the use of different techniques and protocols. Data transmissions consume most of the network energy, and the transmissions over normal ranges require less energy as compared to transmissions over long ranges. Moreover, the nodes closer to the BS deplete their energy faster as compared to distant nodes because of traffic overload. The proposed protocol is aimed at reducing energy consumption and increasing the network lifetime. For this purpose, the network is divided into two regions: region 1 closer to the BS communicating directly, whereas region 2 farther away from the BS having routing nodes to communicate with the BS. Routing nodes do not take part in sensing function but will only move in region 2 collecting data and forwarding it to BS. MATLAB is used as the simulation tool for evaluation, and the results are compared with the existing optimized region-based efficient routing (AORED) and low-energy adaptive clustering hierarchical protocol (LEACH) techniques. The comparison showed that energy conservation and lifetime increased by 15%, and throughput is increased by more than 5% approximately.