Evaluation Of Lithology Variations In Layered Red Beds With Depth: An Example Of The Yellow River Guxian Dam, Nw China

Lithology variations, which are recognized as rock type differences, significantly affect the physical properties of rock masses in red beds. In this paper, we introduce a statistical method for quantitatively evaluating the degree of lithology variations in layered red beds with depth. The core of this method is to use borehole logs as random variables for statistical analysis to calculate the percentage of a specified lithology at a given elevation, which involves seven steps of attitude calculation, reference point selection, distance calculation, elevation modification, data discretization, data statistics, and curve plotting. The Yellow River Guxian Dam is chosen as a field case study. We classify rock types of feldspar sandstone, fine sandstone, and conglomerate into hard rocks and that rock types of calcareous siltstone, argillaceous siltstone, and mudstone into soft rocks. Borehole logs recorded during the geological investigation are used to plot the percentage curve of hard rocks. We find that the degree of lithology variations for each lithology group differs greatly, the general behaviors of lithology variations on two sides of the Guxian Dam riverbed are quite similar but still with some differences, and that some thick lithology groups can be finely divided into several subgroups. On the basis of the hard rock percentage curve, we introduce a lithology variation index to quantitatively characterize the degree of lithology variations, which can be used as an important index to supplement the traditional methods when performing rock mass classifications in red beds. We also plot the trilithology percentage curve of sandstone, calcareous siltstone, and argillaceous siltstone, which serves for the determination of physical parameters of the dam foundation rock mass, the identification of the potential shear sliding surface, and the search for an impervious grouting bottom. Moreover, we find that the crest and trough, which are local high and low points in the hard rock percentage curve, can be used to show some characteristics of shear zones. The locations of shear zones are well represented in the form of troughs and that the development of shear zones has a good linear relationship with the hard rock percentage of the corresponding crest. The method proposed in this paper can be promoted and applied in similar projects or studies.